Lettering with Corel Draw

nihane26 · 05-07-2006, 09:35 PM

Just curious if anyone knows how to letter with corel draw. I'm having some problems and some help would be appreciated.

Piekos · 05-08-2006, 09:16 AM

I use Corel DRAW for design all the time. Ask away.

~N

nihane26 · 05-08-2006, 10:18 PM

How do i do word balloons? i've tried and i can't seem to get it right.

Piekos · 05-09-2006, 11:35 AM

Create a circle with the cirlce tool.

If you want to square it off just a little bit, convert it to curves: ARRANGE/CONVERT TO CURVES. Select the Shape tool (the node editor) and click anywhere on the circle. You'll see the 4 nodes appear. Select one of the nodes and while holding down the CONTROL key, Pull on the node "arms" that appear. Repeat on the node on the other side.

To create the tail: Draw a triangle with the Freehand tool. Select the Shape tool again, select the triangle and when the nodes are selected, you can click the CONVERT LINE TO CURVE button on the menu at the top of your workspace. Then just grab the lines that you want to curve and curve them.

To connect the tail to the balloon, place the tail on the balloon, select both with the Pick tool and then hit the WELD button at the top of your work space.

It sounds way more complex than it is. Takes all of 5 seconds when you get used to it.

~N

nihane26 · 05-09-2006, 06:33 PM

Thanks for the help. I was about to pull my hair out figuring that out.

Ace Corona · 06-26-2018, 10:22 PM

Quote:

Originally Posted by Piekos

I use Corel DRAW for design all the time. Ask away.

~N

Can you show examples of your lettering with CorelDraw?

Stewart Vernon · 06-26-2018, 11:36 PM

The post you're replying to is over 12 years old... he might not be using Corel Draw anymore.

Bishop · 06-27-2018, 11:16 AM

Also, I haven't seen Piekos around here for a very long time. It is unlikely he will come back and post samples.

**paul brian deberry** · 06-27-2018, 05:20 PM

Yeah, he was using CorelDraw probably to save money.

Ace Corona · 06-27-2018, 05:20 PM

Sorry for necroposting, I Googled this topic and it brought me to this thread.

**paul brian deberry** · 06-27-2018, 05:31 PM

Nah, it's cool.

Stewart Vernon · 06-28-2018, 04:11 AM

Yeah... just didn't want you to be waiting for an answer that probably wasn't coming

I will say, that I honestly don't remember ever hearing of anyone lettering in Corel Draw outside of this thread. My father used it for years as a Technical Illustrator before switch back to Adobe Illustrator... and when I was at IBM they used Corel Draw for Technical Illustrations in all the manuals we wrote... but when I was looking into tools-of-the-trade for comics stuff, I never found references to anything other than Illustrator for lettering.

Ace Corona · 07-03-2018, 12:52 PM

Quote:

Originally Posted by Stewart Vernon

Yeah... just didn't want you to be waiting for an answer that probably wasn't coming

I will say, that I honestly don't remember ever hearing of anyone lettering in Corel Draw outside of this thread. My father used it for years as a Technical Illustrator before switch back to Adobe Illustrator... and when I was at IBM they used Corel Draw for Technical Illustrations in all the manuals we wrote... but when I was looking into tools-of-the-trade for comics stuff, I never found references to anything other than Illustrator for lettering.

Thank you for your concern, I was interested in seeing if Corel was a cheaper alternative to Illustrator, I have the student edition of CS 5 but my laptop isn’t going to last forever. If I got a new laptop, the adobe subscription seems overpriced.

Toondoctor · 07-03-2018, 02:06 PM

Corel Draw's most current version is probably very similar to Illustrator. Haven"t used them it in over a decade but it was solid then, probably still is now. The toolsets of most of these apps have stabilized over decades ago. The differences are in export filter, plug ins and interface.

Ace Corona · 07-03-2018, 08:56 PM

Quote:

Originally Posted by Toondoctor

Corel Draw's most current version is probably very similar to Illustrator. Haven"t used them it in over a decade but it was solid then, probably still is now. The toolsets of most of these apps have stabilized over decades ago. The differences are in export filter, plug ins and interface.

Thank you for your help, that’s good to know

05-07-2006, 09:35 PM	#1
nihane26 Registered User Join Date: May 2006 Posts: 3	Lettering with Corel Draw Just curious if anyone knows how to letter with corel draw. I'm having some problems and some help would be appreciated.

05-08-2006, 09:16 AM	#2
Piekos Blambot Font Guy Join Date: Jan 2002 Location: New England Posts: 1,311	I use Corel DRAW for design all the time. Ask away. ~N __________________ Blambot Comic Fonts & Lettering http://www.blambot.com

05-09-2006, 11:35 AM	#4
Piekos Blambot Font Guy Join Date: Jan 2002 Location: New England Posts: 1,311	Create a circle with the cirlce tool. If you want to square it off just a little bit, convert it to curves: ARRANGE/CONVERT TO CURVES. Select the Shape tool (the node editor) and click anywhere on the circle. You'll see the 4 nodes appear. Select one of the nodes and while holding down the CONTROL key, Pull on the node "arms" that appear. Repeat on the node on the other side. To create the tail: Draw a triangle with the Freehand tool. Select the Shape tool again, select the triangle and when the nodes are selected, you can click the CONVERT LINE TO CURVE button on the menu at the top of your workspace. Then just grab the lines that you want to curve and curve them. To connect the tail to the balloon, place the tail on the balloon, select both with the Pick tool and then hit the WELD button at the top of your work space. It sounds way more complex than it is. Takes all of 5 seconds when you get used to it. ~N __________________ Blambot Comic Fonts & Lettering http://www.blambot.com

06-26-2018, 11:36 PM	#7
Stewart Vernon Registered User Join Date: Sep 2014 Location: Kittrell, NC Posts: 1,568	The post you're replying to is over 12 years old... he might not be using Corel Draw anymore. __________________ - Where you AT-AT? Where I go when I am not here.

06-27-2018, 11:16 AM	#8
Bishop Registered User Join Date: Aug 2003 Location: Kholinar, Alethkar Posts: 6,241	Also, I haven't seen Piekos around here for a very long time. It is unlikely he will come back and post samples. __________________ "I'd give my right arm to be ambidextrous." -Anonymous

05-08-2006, 10:18 PM	#3
nihane26 Registered User Join Date: May 2006 Posts: 3	How do i do word balloons? i've tried and i can't seem to get it right.

05-09-2006, 06:33 PM	#5
nihane26 Registered User Join Date: May 2006 Posts: 3	Thanks for the help. I was about to pull my hair out figuring that out.

06-27-2018, 05:20 PM	#9
paul brian deberry is a MASShole Join Date: Mar 2002 Location: just out of reach Posts: 3,683	Yeah, he was using CorelDraw probably to save money. __________________ P.B.DeBerry is a writer/letterer of words, soup enthusiast in Massachusetts with a talent for over thinking. This bio took him five hours to write. You can read more from P.B. at.. fisticuffswriting.com

06-27-2018, 05:20 PM	#10
Ace Corona Microterran Liberator Join Date: Dec 2011 Location: Downey, CA Posts: 275	Sorry for necroposting, I Googled this topic and it brought me to this thread.

06-27-2018, 05:31 PM	#11
paul brian deberry is a MASShole Join Date: Mar 2002 Location: just out of reach Posts: 3,683	Nah, it's cool. __________________ P.B.DeBerry is a writer/letterer of words, soup enthusiast in Massachusetts with a talent for over thinking. This bio took him five hours to write. You can read more from P.B. at.. fisticuffswriting.com

06-28-2018, 04:11 AM	#12
Stewart Vernon Registered User Join Date: Sep 2014 Location: Kittrell, NC Posts: 1,568	Yeah... just didn't want you to be waiting for an answer that probably wasn't coming I will say, that I honestly don't remember ever hearing of anyone lettering in Corel Draw outside of this thread. My father used it for years as a Technical Illustrator before switch back to Adobe Illustrator... and when I was at IBM they used Corel Draw for Technical Illustrations in all the manuals we wrote... but when I was looking into tools-of-the-trade for comics stuff, I never found references to anything other than Illustrator for lettering. __________________ - Where you AT-AT? Where I go when I am not here.

07-03-2018, 02:06 PM	#14
Toondoctor Registered User Join Date: Aug 2014 Location: Toronto Posts: 61	Corel Draw's most current version is probably very similar to Illustrator. Haven"t used them it in over a decade but it was solid then, probably still is now. The toolsets of most of these apps have stabilized over decades ago. The differences are in export filter, plug ins and interface. __________________ Read Johnny Bullet, a strip about a man and his ride.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode