Slit strip 6 process.

[William Blankenship]

I got Cary's blessing before posting this.

In lieu of a webstrip this week I’m posting a step-by-step tutorial of last weeks strip. When I was drawing it a few weeks back, I made sure to capture each stage of the process from start to finish. I’m not quite sure how long it took to finish, but it was a few hours over two days time.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough1.JPG

I start by gesturing things out in a new layer created above the canvas in Corel Painter X. I use a brush called “What I do is secret” that I found on DeviantArt, with the opacity set low, to like 3-6 percent. I’m mostly going for rough fast lines here, starting with a few instinctual hashes and sketching out the main elements.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough2.JPG

I reset the opacity on that layer until those gestures are just dark enough to see and create a new layer. I use the same brush and color to start defining the structure of the image. While these are still pretty rough, I’l be inking from this so I need to put in everything that needs to be there to do that. In next weeks strip, I was rushing and neglected to put Slit’s wrist accessories on and almost forgot the cigarette on his t-shirt. Even though I do ink my own stuff, it’s still important to have a tight process because if you forget something in the pencils it’s harder to fix after you’ve started colors. Working digitally does have the advantage of making fixes at any stage, however.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough3.JPG

I rough out the finer detail in the first two panels and sketch out the third panel. I also add some lettering guides in for E.T. Dollman, letterer for Bohemian Zen. I do want to make the point that even before the rough sketch, alot of thought goes into how to make the strip read the best. Because Slit’s ‘abilities’ are so odd, I’m always trying to make it read as clearly as possible in a few panels, especially with gags like these.

[William Blankenship]

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough4.JPG

I rough out the last panel and sort out the last of the details. I’ve also cut out the contents of the first panel and made slit smaller in relation to that panel in order to leave more room for lettering.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough5.JPG

I start the inking stage by creating a new layer and lowering the opacity on the pencils. I set my color to black and reset the opacity on my brush to 100%. I pick out a size that gives me the lines I want and start cutting through the main detail. Some of the smaller detail I scale back the brush size for.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough6.JPG

I cut through more of the detail and add the panel borders to the first three panels. I overlap the panel border in panel 2, but I did it to lead the eye toward Mitch’s expression in three. I thought it would help the gag read more clearly. I’m always trying to make them so that someone could read the title of the strip, read one and get it and I’m always pushing Jeremy to come up with strips that do that.

[William Blankenship]

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough7.JPG

I ink the last panel, save and open photoshop.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough8.jpg

I create a layer beneath the inks and flat out my main elements. I just fill the whole panels each a slighlty different color so that I can select them individualy, then get the pencil tool in Photoshop with no pen pressure variation added. I select a panel and then take the pencil tool and make a solid line around the outer edge either by drawing, or holding shift and tapping it out in short straight line segments. I deselect each figure as I flat it. Flatting out the whole figures wil help in the shading stage as well.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough9.jpg

I lock the layer and then create a new one. I select the figures with the wand set to zero, and flat out their individual colors. I deselect each color as I flat it to avoid have to flat an edge twice. I’m stealing my colors from old strips and will be adjusting them as I go.

[William Blankenship]

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough10.jpg

I open a new layer and set the layer mode to multiply. This is where those flatted figures come into play as I can select them in that first layer and just render the shading on the whole figure. I grab a light blue color and use a basic brush tool to draw in the cel shading. At this point traditional skills come into play as I’m trying to creat a bit of depth. I’m using the eraser tool to my advantage, and I go back and forth between drawing in and erasing out shade. Pay attention to where large objects cast shadow over something, Like Slit’s arms over Mitch’s head in panel 2. It can help creat a more dynamic sense of depth. Try to find a blance between the light and shadow that work for you and the style you want to create.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough11.jpg

I shade the last two panels using the same techniques. Notice stuff like Slit’s shirt in panel three where the folds are deeper because of the shadow being heavier.

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough12.jpg

I create a new layer and set the layer mode to screen. I select the whole figures individually and deselect the shadow with the wand. I then grab my gradient tool and a light yellow, and set my gradient tool to anywhere between 10-15% opacity. Click Select, Modify, and Contract, and set the conraction to 1-2 pixels. Switching between the flat and circular gradient for whatever effect you’re going for, create a highlight gradient coming from the direction of the light source. Just enough to give the impression of light. Too much and you’ll wash out your colors. I also add a gradient to the background, and give highlights on both Slit and Mitch’s hair.

[William Blankenship]

http://www.bohemian-zen.com/Images/Slit%20strips%206%20walkthrough13.jpg

At this point I add color hold to the lines. I don’t want to go into that, but if your interested in learning, Google “color holds tutorial” and you should find something. It’s essentially making a layer mask with everything but the lines masked and colors adjusted to make the lines have a bit of color. Then we send it off to E.T. with the script and some lettering guides sketched out.

http://www.bohemian-zen.com/comics/2009-03-11-Slit-6.jpg

I get back the lettered page, add the title and credits and it’s ready to post.

[Justice41]

I love it. I wish I could slam out artwork like that.

[zcotty]

Cool!! Have you tried doing the whole process in Painter?

[L Jamal]

My process is very similar to this except I only ink, letter and grayscale.

Generally, I
- create a template in Photoshop for the project that has the outer border
- place the pencils on a layer under the outer border template
- create the panels
- save the file as a layered PSD
- flatten the file and save it as a 72 DPI TIF file
- open the TIF file in Illustrator for lettering
- letter as save the AI file
- import the AI file into Photoshop
- open the PSD file
- layer the lettering on top of the panel layer in the PSD
- ink the strip under the panel layer
- flatten the ink layer into one layer
- hide the pencil layer
- set the ink layer to multiply (so the gray layer will show through)
- create gray layer under the inks
- to all my grayscale work
- save the PSD file
- flatten the PSD file
- save the file as a TIF file

DONE

for some work, I work at full size 300 DPI. If I'm working at print size, I generally work at 400-450 DPI.
You can see shots of the major steps in my process for the new Eirian and Orumil strips at:
http://www.facebook.com/album.php?aid=62310&id=531147837&l=43c6271c89

[Lovecraft13]

I love it. I wish I could slam out artwork like that.


He makes it look so easy!

[William Blankenship]

I love it. I wish I could slam out artwork like that.

LOL, Thanks. I've definitely been subscribing to the idea of "Just what needs to be there" mentality as of late.

zcotty: I don't think I'm very comfortable with painter in actually painting yet. I need to look into it more. I've been itching to try some more digipaint techniques. I may have to ask a certain someone about also coloring the cover to a third issue to a certain mini-series.

ljamal: Very cool! I love seeing other people's processes. Thanks for posting this up.

Lovecraft13: It seems to be easiest when I allow it to be, which is only troublesome in that I am a complete masochist.

[zcotty]

zcotty: I don't think I'm very comfortable with painter in actually painting yet. I need to look into it more. I've been itching to try some more digipaint techniques. I may have to ask a certain someone about also coloring the cover to a third issue to a certain mini-series.



Personally i use Painter for all the.. well.. :yawn: painting. But then if I need to do some corrections I us photoshop.

So my work goes something like this:

* I sketch out my layouts the "old fashioned way" on regular printer paper.
* Using the previous sketched layouts I do some Painter sketching(Sometimes, not very often anymore, I'll scan in something I've done in pencil)
* In Painter I do the inks on a seperate layer.
* Still in Painter I make a seperate layer set to Gel for Digital Waterpaints. This, of course is totally up to the artist. I just happen to love waterpaints. Not as clean looking, but well... different thread. :p
* I Save the file in Painter format for later use.
* I flatten all the layers (Drop all in Painter) and save it as a Tif.
* Illustrator time. Do the balloons etc. Export as Tif
* Photoshop time. Do color corrections if needed. Some special effects if needed.
* Still in PS I do the outlines for the panels. (Yes I could do this in Illustrator. Habit I guess)
* Flatten. Resize if it's going on the web.

Pretty much it. Most of this is repeat, but it just goes to show that the most common ways of doing things usually are the best.

Of course to each their own... :laugh:


I've been itching to try some more digipaint techniques.

You should really see someone about that... :confused: